Jeppesen FliteDeck Pro (iOS) - Manual (Page 41)

Viewing Enroute Map Information
North Up or Track Up
Jeppesen FliteDeck Pro User Guide October 2014
Copyright © 2014 Jeppesen. All rights reserved.
34
For example, to enter the LBSTA Three RNAV Departure out of
KBOS, departing on Runway 22L, via the LBSTA enroute
transition, you would enter: 22L.LBSTA3.LBSTA
NOTE The depiction of SID and STAR transition points on the
enroute map is provided to support situational awareness only.
Always brief the SID or STAR terminal procedure.
CTA DME Step Values
CTA DME step values appear around airports in Australia and
New Zealand when Airspace is set to show on the enroute map.
To view CTA information, touch, hold, and release the CTA
boundary. You might need to select a specific CTA to review its
information.
North Up or Track Up
To change the enroute map orientation, tap the North Up or
Track Up button to switch between orientations.
NOTE To change the orientation to Track Up, Enable Moving
Map in JeppFD-Pro global settings must be set to ON.
View Ownship on the Enroute Map
The current aircraft position is available on the enroute map when
both Enable Moving Map and Display Ownship on Enroute in
JeppFD-Pro global settings are set to ON and the minimum GPS
accuracy requirement is met.