Jeppesen FliteDeck Pro (iOS) - Manual (Page 56)

Data Updates
Perform an Update
October 2014 Jeppesen FliteDeck Pro User Guide
Copyright © 2014 Jeppesen. All rights reserved.
49
A badge appears over the GPS Status button if the GPS signal
does not meet the minimum accuracy requirement. The minimum
required GPS accuracy to display ownship position is:
• 200 meters for the enroute map.
• 17 meters for an airport diagram.
Lock the Display
To lock and unlock the FliteDeck Pro display, tap the Display
Lock button on the toolbar.
Locking the display prevents you from panning or zooming away
from the current display.
When the display is locked, the Display Lock button is
highlighted and you cannot access any other FliteDeck Pro
button.
Data Updates
Jeppesen FliteDeck Pro provides a simple and quick way to
verify the status of your enroute, terminal charts, and manuals
data; and if required, perform updates.
Perform an Update
Whenever data updates are available, a badge appears on the
Settings button. The badge indicates the number of updates
available.
• The badge is amber when data is current, and an update is
available.
• The badge is red when data is not current.