Kraus C-GV-710-12mm-15000ORB - Manual (Page 6)

Pop Up Drain & Mounting Ring Installation
(ONLY IF INCLUDED)
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34”
Suggest
ed
28”
Suggest
ed
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34”
Suggest
ed
28”
Suggest
ed
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Locate and disassemble your pop up drain in the following order:
• Unscrew the tail piece
• Unscrew the brass nut
• Remove the firm washer
• Remove the concave washer, leaving the top thin rubber
washer on.