Kraus C-GV-710-12mm-15000ORB - Manual (Page 8)

CARE & MAINTANANCE
Kraus glass vessel sinks are hand crafted from the highest quality tempered
glass, and are extremely durable and resistant to corrosion. However, despite
the durability and strength of our sinks, they may still be damaged if proper
measures are not taken in their care and maintenance.
In order to prolong the life of you glass sink, simple daily maintenance is the
key to keep your sink in its original condition. We suggest cleaning your sink
after each use with a soapy sponge,then rinsing thoroughly with warm water.
You may dry it with a towel or a dry cloth. This will eliminate water spots and
streaks while the sink is in use.
Do not be alarmed in case you begin to notice stains on your glass sink. They
are most often caused by various minerals contained in your water supply.
These mineral deposits settle in the surface of the glass and may cause
the surface to stain. In order to eliminate stain spots, use a non-abrasive or
mild-abrasive cleaner as mentioned earlier. Remember not to apply force
while cleaning your glass sink. Do not scrub the glass, as you may scratch the
surface of the sink. When finished, rinse thoroughly with warm water and dry
with a towel or a soft cloth.
At KrausUSA your satisfaction with quality and durability of our products
is extremely important to us. Therefore, we hope that you try to avoid
prolonged sink contact with products containing high concentrations
of acids, dishwashing detergents, or bleaches containing chlorine. These
products may stain the surface of the sink. Rinse thoroughly if these products
do come in contact with the sink surface and dry it with a towel or a soft
cloth.