Getting started – Dodge 2010 Journey - User Guide User Manual

Page 19

Advertising
background image

Stadium Tip ’n Slide™ (Easy Entry/Exit Seat) — Seven Passenger Models

To Move The Second-Row Passenger Seat
Forward

NOTE: Raise the 20% seatback/armrest
before moving the 60% seat to allow for full
seat travel.

• To allow passengers to easily enter or exit

the third-row passenger seats move the Tip
’n Slide™ control lever on the upper
outboard side of the seatback forward, and
in one fluid motion, the seat cushion flips
upward and the seat moves forward on its
tracks.

To Unfold And Move The Second-Row Passenger Seat Rearward

• Move the seatback rearward until it locks in place and then continue sliding the seat

rearward on its tracks until it locks in place.

• Push the seat cushion downward to lock it in place.

• Adjust the seat track position as desired.

WARNING!

• Do not drive the vehicle with the seat in this position, as it is only intended for

entering and exiting the third row seats. Failure to follow this warning may result in
personal injury.

• Be certain that the seatback and seat are locked securely into position. Otherwise,

the seat will not provide the proper stability for child seats and/or passengers. An
improperly latched seat could cause serious injury.

17

GETTING STARTED

Advertising