Operating your vehicle, Turn signal/lights lever, Headlights/parking lights/automatic headlights – Dodge 2010 Journey - User Guide User Manual

Page 24: Instrument panel dimmer, High beam operation, Fog lights, Turn signals/lane change assist

Advertising
background image

TURN SIGNAL/LIGHTS LEVER

Headlights/Parking Lights/Automatic Headlights

• Rotate the end of the lever to the first detent for parking lights

, the second

detent for headlights

and the third detent for AUTO.

• When set to AUTO, the system automatically turns the headlights on or off based on

ambient light levels.

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim the

instrument panel lights and prevent the interior lights from illuminating when a door
is opened.

• Rotate the center portion of the lever up to increase the brightness of the instrument

panel lights when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the next detent position to brighten

the odometer and radio controls when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the last detent to turn on the interior

lighting.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

Turn Signals/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three times

and automatically turn off.

OPERATING YOUR VEHICLE

22

Advertising