Adjustable pedals, Adjustable foot rest, Getting started – Dodge 2010 Viper - User Guide User Manual

Page 17

Advertising
background image

ADJUSTABLE PEDALS

Adjustable Pedals

• Push the switch located on the trim panel

below the steering column forward to move
the brake, accelerator and clutch pedals
away from the driver and push the switch
rearward to move the pedals closer to the
driver.

WARNING!

Do not adjust the pedals while the vehicle is moving. You could lose control and have
an accident. Always adjust the pedals while the vehicle is parked.

CAUTION!

Do not place any article under the adjustable pedals or impede its ability to move, as
it may cause damage to the pedal controls. Pedal travel may become limited if
movement is stopped by an obstruction in the adjustable pedal's path.

Adjustable Foot Rest

• Using a 13 mm socket wrench, loosen the

nut on the pedal.

• Slide the pedal either forward or backward

and rotate it upward or downward as
desired.

• Tighten the nut, being careful not to over

tighten it.

15

GETTING STARTED

Advertising