Dodge 2010 Viper - User Guide - Manual (Page 40)

Damper Components
Components
1. Spherical Bearing Mount
2. Rebound Adjuster
3. Upper Spring Seat
4. Primary Spring
5. Helper Spring
6. Lower Spring Seat
7. Compression Adjuster
8. Threaded Main Body
9. Reservoir
10. Spanner Wrench
11. Spring Seat Hex Wrench
• Your Viper ACR is delivered with the suspension adjusted for optimal street comfort.
Below are the adjustment capabilities:
Compression Damping: 14 settings front and rear
Rebound Damping: 19 settings front and rear
Ride Height: +/- 1
1
4
in. (32 mm)
• Any adjustments to the suspension settings should be made in small increments.
CAUTION!
The use of improper tools may severely damage your suspension. The tools included
with your Viper ACR are the only tools that should be used for adjusting the ride
height.
Ride Height Adjustment
• Your ACR is delivered from the factory at a ride height that provides a good balance for
drivability on the street. The adjustable suspension allows for ride height adjustment.
As with all of the suspension adjustments, caution should be used when changing the
ride height.
• Before any adjustments are made to your ride height, clean threaded area with soapy
water to be sure it is free and clear of debris.
CAUTION!
Only the factory ride heights should be used while operating the vehicle on the street.
Low ride heights can cause damage to the vehicle.
PERFORMANCE/ACR
38