Clock setting, Station presets, Electronics – Dodge 2010 Viper - User Guide User Manual
Page 25
Advertising
Clock Setting
• Turn the ignition switch to the ON/RUN or ACC position.
• Using the point of a ballpoint pen or similar object, press either the H (HOUR) or M
(MINUTE) button on the radio. The display will show the time.
• Press the “H” button to set hours or the “M” button to set minutes. The time setting
will increase each time you press a button.
Station Presets
• Press the SET button once and SET 1 will show in the display. Then select the button
(1–5).
• A second station may be added to each pushbutton. Press the SET button twice and
SET 2 will show in the display, then select button (1–5).
23
ELECTRONICS
Advertising