To turn off, To resume – Dodge 2014 Durango - Owner Manual User Manual

Page 207

Advertising
background image

• The shift lever/gear selector is removed from the

Drive position.

• The Electronic Stability Control/Traction Control Sys-

tem (ESC/TCS) activates.

• The vehicle parking brake is applied.
• Driver seatbelt is unbuckled at low speeds.
• Driver door is opened at low speeds.
• A Trailer Sway Control (TSC) event occurs.
• The driver switches ESC to full-off mode.

To Turn Off

The system will turn off and clear the set speed in
memory if:

• The Adaptive Cruise Control (ACC) ON/OFF button

is pressed.

• The Normal (Fixed Speed) Electronic Speed Control

ON/OFF button is pressed.

• The ignition is turned OFF.
• You switch to Four-Wheel Drive Low.

To Resume

If there is a set speed in memory press the RES (resume)
button and then remove your foot from the accelerator
pedal. The EVIC will display the last set speed.

NOTE:

• If your vehicle stays at standstill for longer than two

seconds, then the system will cancel and the brake
force will be ramped-out. The driver will have to apply
the brakes to keep the vehicle at a standstill.

• ACC cannot be resumed if there is a stationary vehicle

in-front of your vehicle in close proximity.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

205

Advertising