Vehicle security alarm — if equipped, To arm the system – Dodge 2014 Durango - Owner Manual User Manual

Page 22

Advertising
background image

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the
user’s authority to operate the equipment.

VEHICLE SECURITY ALARM — IF EQUIPPED

This Vehicle Security Alarm monitors the vehicle doors,
liftgate, and ignition for unauthorized operation. When
the alarm is activated, the interior switches for door locks
and power liftgate are disabled. The Vehicle Security
Alarm provides both audio and visual signals, the horn
will sound, the headlights will turn on, park lamps
and/or turn signals will flash repeatedly for three min-
utes. If the disturbance is still present (driver’s door,
passenger door, other doors, ignition) after three minutes,
the headlights, park lamps and/or turn signals will flash
for an additional 15 minutes.

NOTE:

The Panic and Security alarms are quite different.

Please take a moment to activate the Panic and the
Security modes to hear the differences in the horn. In case
one should go off in the future, you will need to know
which mode has been activated in order to deactivate it.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:

1. Make sure the vehicles ignition is cycled to the “OFF”

position (refer to

ЉStarting ProceduresЉ in ЉStarting

And Operating

Љ for further information).

• For vehicles equipped with Keyless Enter-N-Go™,

make sure the vehicle ignition system is OFF.

• For vehicles not equipped with Keyless Enter-N-

Go™, make sure the vehicle ignition system is OFF
and the key is physically removed from the ignition.

20

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising