Dodge 2014 Durango - Owner Manual - Manual (Page 539)

1. Loosen (but do not remove) the wheel lug nuts by
turning them to the left, one turn, while the wheel is
still on the ground.
2. Assemble the jack and jacking tools.
3. For the front axle, place the jack on the body flange
just behind the front tire as indicated by the triangular
lift point symbol on the sill molding. Do not raise the
vehicle until you are sure the jack is fully engaged.
Jack And Tool Assembly
Lift Point Symbol On Sill Molding
6
WHAT TO DO IN EMERGENCIES 537