Display – Dodge 2014 Durango - Owner Manual User Manual

Page 342

Advertising
background image

NOTE:

Only one touchscreen area may be selected at a

time.

When making a selection, press the soft-key to enter the
desired mode. Once in the desired mode press and
release the preferred setting until a check-mark appears
next to the setting, showing that setting has been se-
lected. Once the setting is complete either press the Back
Arrow soft-key or the Back hard-key to return to the
previous menu or press the X soft-key to close out of the
settings screen. Pressing the Up or Down Arrow soft-keys
on the right side of the screen will allow you to toggle up
or down through the available settings.

NOTE:

Depending on the vehicles options, feature set-

tings may vary.

Display

After pressing the “Display” soft-key the following set-
tings will be available:

Display Mode

When in this display you may select one of the auto
display settings. To change Mode status, touch and
release the “Day,” “Night” or “Auto” soft-key. Then
touch the back arrow soft-key.
Display Brightness With Headlights ON

When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the + and –
setting soft-keys or by selecting any point on the scale
between the “+” and “–” soft-keys. Then touch the back
arrow soft-key.
Display Brightness With Headlights OFF

When in this display, you may select the brightness with
the headlights off. Adjust the brightness with the + and –
setting soft-keys or by selecting any point on the scale
between the “+” and “–” soft-keys. Then touch the back
arrow soft-key.

340

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising