Cleaning the parksense® system, Parksense® system usage precautions – Dodge 2014 Durango - Owner Manual User Manual

Page 238

Advertising
background image

message for as long as the vehicle is in REVERSE. Under
this condition, ParkSense® will not operate.

If “PARKSENSE UNAVAILABLE WIPE REAR SEN-
SORS” appears in the Electronic Vehicle Information
Center (EVIC) make sure the outer surface and the
underside of the rear fascia/bumper is clean and clear of
snow, ice, mud, dirt or other obstruction and then cycle
the ignition. If the message continues to appear, see an
authorized dealer.

If “PARKSENSE UNAVAILABLE SERVICE REQUIRED”
appears in the EVIC, see an authorized dealer.

Cleaning The ParkSense® System

Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.

ParkSense® System Usage Precautions

NOTE:

• Ensure that the rear bumper is free of snow, ice, mud,

dirt and debris to keep the ParkSense® system oper-
ating properly.

• Jackhammers, large trucks, and other vibrations could

affect the performance of ParkSense®.

• When you turn ParkSense® OFF, the instrument clus-

ter will display “PARKSENSE OFF” Furthermore, once
you turn ParkSense® off, it remains off until you turn
it on again, even if you cycle the ignition key.

• When you move the shift lever/gear selector to the

REVERSE position and ParkSense® is turned OFF, the
EVIC will display “PARKSENSE OFF” message for as
long as the vehicle is in REVERSE.

236

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising