Rain sensing wipers — if equipped – Dodge 2015 Charger-SRT - Owner Manual User Manual

Page 161

Advertising
background image

NOTE:

The Headlights On with Wipers feature can be

turned on or off using the Uconnect® System. Refer to

“Uconnect® Settings/Customer Programmable Fea-

tures” in “Understanding Your Instrument Panel” for

further information.

Rain Sensing Wipers — If Equipped

This feature senses moisture on the windshield and

automatically activates the wipers for the driver. The

feature is especially useful for road splash or overspray

from the windshield washers of the vehicle ahead. Rotate

the end of the multifunction lever to one of four settings

to activate this feature.
The sensitivity of the system can be adjusted with the

multifunction lever. Wiper delay position 1 is the least

sensitive, and wiper delay position 4 is the most sensi-

tive. Setting 3 should be used for normal rain conditions.

Settings 1 and 2 can be used if the driver desires less

wiper sensitivity. Setting 4 can be used if the driver

desires more sensitivity. Place the wiper switch in the

OFF position when not using the system.
NOTE:

• The Rain Sensing feature will not operate when the

wiper switch is in the low or high-speed position.

• The Rain Sensing feature may not function properly

when ice, or dried salt water is present on the wind-

shield.

• Use of Rain-X® or products containing wax or silicone

may reduce Rain Sensing performance.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159

Advertising