To activate, To set a desired speed – Dodge 2015 Charger-SRT - Owner Manual User Manual

Page 168

Advertising
background image

NOTE:

In order to ensure proper operation, the Elec-

tronic Speed Control System has been designed to shut

down if multiple Speed Control functions are operated at

the same time. If this occurs, the Electronic Speed Control

System can be reactivated by pushing the Electronic

Speed Control ON/OFF button and resetting the desired

vehicle set speed.

To Activate

Push the ON/OFF button to activate the electronic speed

control. CRUISE CONTROL READY will appear on the

instrument cluster to indicate the electronic speed control

is on. To turn the system off, push the ON/OFF button a

second time. CRUISE CONTROL OFF will appear on the

instrument cluster to indicate the electronic speed control

is off. The system should be turned off when not in use.

WARNING!

Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you are not using it.

To Set A Desired Speed

Turn the Electronic Speed Control ON. When the vehicle

has reached the desired speed, push the SET (+) or SET (-)

button and release. Release the accelerator and the ve-

hicle will operate at the selected speed. Once a speed has

been set a message CRUISE CONTROL SET TO MPH

(km/h) will appear indicating what speed was set. A

CRUISE indicator lamp, along with set speed will also

appear and stay on in the instrument cluster when the

speed is set.

166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising