Lanesense — if equipped, Lanesense operation – Dodge 2015 Charger-SRT - Owner Manual User Manual

Page 203

Advertising
background image

LANESENSE — IF EQUIPPED

LaneSense Operation

The LaneSense system is operational at speeds above

37 mph (60 km/h) and below 112 mph (180 km/h). The

LaneSense system uses a forward looking camera to

detect lane markings and measure vehicle position

within the lane boundaries.
When both lane markings are detected and the driver

unintentionally drifts out of the lane (no turn signal

applied), the LaneSense system provides a haptic warn-

ing in the form of torque applied to the steering wheel to

prompt the driver to remain within the lane boundaries.

If the driver continues to unintentionally drift out of the

lane, the LaneSense system provides a visual warning

through the Driver Information Display (DID) to prompt

the driver to remain within the lane boundaries.

The driver may manually override the haptic warning by

applying torque into the steering wheel at any time.
When only a single lane marking is detected and the

driver unintentionally drifts across the lane marking (no

turn signal applied), the LaneSense system provides a

visual warning through the DID to prompt the driver to

remain within the lane. When only a single lane marking

is detected, a haptic (torque) warning will not be pro-

vided.
NOTE:

When operating conditions have been met, the

LaneSense system will monitor if the driver’s hands are

on the steering wheel and provides an audible warning

to the driver when the driver’s hands are not detected on

the steering wheel. The system will cancel if the driver

does not return their hands to the wheel.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201

Advertising