Wheel and tire torque specifications, Torque specifications, Wheel and tire torque – Dodge 2015 Charger-SRT - Owner Manual User Manual

Page 467: Specifications

Advertising
background image

CAUTION!

Driving with a hot cooling system could damage
your vehicle. If the temperature gauge reads 240°F
(116°C) or greater pull over and stop the vehicle. Idle
the vehicle with the air conditioner turned off until
the pointer drops back into the normal range 200–
230°F (93–110°C). If the pointer remains at 240°F
(116°C) or greater and you hear a chime, turn the
engine off immediately and call for service.

WARNING!

You or others can be badly burned by hot engine
coolant (antifreeze) or steam from your radiator. If
you see or hear steam coming from under the hood,
do not open the hood until the radiator has had time
to cool. Never try to open a cooling system pressure
cap when the radiator or coolant bottle is hot.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure

that the wheel is properly mounted to the vehicle. Any

time a wheel has been removed and reinstalled on the

vehicle the lug nuts/bolts should be torqued using a

properly calibrated torque wrench.

Torque Specifications

Lug Nut/Bolt Torque

**Lug Nut/

Bolt Size

Lug Nut/

Bolt Socket

Size

111 Ft-Lbs (150 N·m)

M14 x 1.50

22 mm

**Use only Chrysler recommended lug nuts/bolts and

clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface prior to mounting

the tire and remove any corrosion or loose particles.

6

WHAT TO DO IN EMERGENCIES 465

Advertising