Tether strap installation – Dodge 2015 Durango - User Guide User Manual

Page 26

Advertising
background image

Tether Strap Installation

1. To access the top tether strap anchorages behind the rear seat, pull the carpeted floor

panel away from the seat back, this will expose the top tether strap anchorages.

2. Route the tether strap to provide the most direct path for the strap between the anchor

and the child seat.

3. If your vehicle is equipped with adjustable rear head restraints, raise the head

restraint, and where possible, route the tether strap under the head restraint and
between the two posts. If not possible, lower the head restraint and pass the tether
strap around the outboard side of the head restraint.

4. For the center seating position, route the tether strap over the seatback and headrest.
5. Attach the tether strap hook of the child restraint to the top tether anchorage and

remove slack in the tether strap according to the child restraint manufacturer’s
instructions.

DO NOT USE the cargo tie down loops located on the load floor as tether

anchorages.

Top Tether Strap Mounting (60/40 Seat)

Top Tether Strap Mounting (Captain's Chair)

G E T T I N G S T A R T E D

24

Advertising