Lock or unlock the liftgate, Engine starting/ stopping – Dodge 2015 Journey - User Guide User Manual

Page 14

Advertising
background image

Lock Or Unlock The Liftgate:

• With a valid Keyless Enter-N-Go™ Key Fob within 3 feet (1 meter) of the liftgate, push

the electronic liftgate lock/unlock pad located to the left of the liftgate handle to unlock
the liftgate. Push the button a second time to lock the liftgate.

NOTE:

Refer to your Owner's Manual on the DVD
for further information.

ENGINE STARTING/STOPPING

Starting

• With a valid Keyless Enter-N-Go™ Key

Fob inside the vehicle.

• Place the shift lever in PARK or NEUTRAL.
• While pushing the brake pedal, push the

ENGINE START/STOP button once. If the

engine fails to start, the starter will disen-

gage automatically after 10 seconds.

• To stop the cranking of the engine prior to

the engine starting, push the button again.

NOTE:

In case the ignition switch does not change
with the push of a button, the RKE trans-
mitter (Key Fob) may have a low or dead
battery. In this situation, a back up method
can be used to operate the ignition switch. Put the nose side of the Key Fob against the
ENGINE START/STOP button and push to operate the ignition switch.

1 — Electronic Liftgate Lock/Unlock Pad

Engine Start/Stop Button

G E T T I N G S T A R T E D

12

Advertising