Dodge 2015 Journey - User Guide User Manual

Page 33

Advertising
background image

STADIUM Tip ’n Slide™ (EASY ENTRY/EXIT SEAT) — SEVEN PASSENGER MODELS

To Move The Second-Row Passenger Seat Forward

NOTE:

Raise the 20% seatback/armrest before moving the 60% seat to allow for full seat travel.
• To allow passengers to easily enter or exit the third-row passenger seats move the Tip ’n

Slide™ control lever on the upper outboard side of the seatback forward, and in one
fluid motion, the seat cushion flips upward and the seat moves forward on its tracks.

To Unfold And Move The Second-Row Pas-
senger Seat Rearward

• Move the seatback rearward until it locks

in place and then continue sliding the
seat rearward on its tracks until it locks in
place.

• Push the seat cushion downward to lock

it in place.

• Adjust the seat track position as desired.

50/50 SPLIT THIRD-ROW PASSENGER SEATS WITH FOLD-FLAT FEATURE

To Fold The Seat

• With the second-row passenger seat fully upright, pull the latch release-loop located at

the top of the seatback upward, push the seat forward slightly, and release the
release-loop. Then, continue to push the seat forward. The head restraints will fold
automatically as the seat moves forward.

To Unfold The Seat

• Grasp the assist strap loop on the seatback and pull it toward you to raise the seatback.

Continue to raise the seatback until it locks in place. Then, raise the head restraint to
lock it in place.

• To lock the seatback in a reclined position, pull the latch release-loop located at the top

of the seatback upward, allow the seatback to recline, then release the release-loop.

Seat In Tip ‘n Slide™ Position

G E T T I N G S T A R T E D

31

Advertising