Canon IR1600 - Manual (Page 12)

B
a
sic Cop
y
ing
1
1-6 Flow of Copy Operations
NOTE
• If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job is
completed.
• When scanning is completed, remove the original.
• If you have set the Department ID Management, press . (See the Reference Guide.)
•
If the optional Card Reader is attached, remove the control card. (See the Reference Guide.)
● When you want to reserve a copy job while the machine is printing:
▼ Place the original and press (start). (See “Reserving a Copy Job While Printing,” on
p. 1-23.)
● When you want to cancel a copy job:
▼ Press (Stop).
▼ Press or to select <YES> or <NO>.
NOTE
• After you have pressed (Stop), several copies may be output from the machine.
• You can also stop a copy job in the Monitor screen. (See the Reference Guide.)
● When you want to interrupt a copy job:
▼ To interrupt a copy job when you need to make priority copies, press (Interrupt).
For instructions on explaining how to interrupt a copy job, see “Interrupting the Current Job
to Make Priority Copies (Interrupt Mode),” on p. 1-25.
CANCEL COPYING?
< YES NO >
ID