Canon IR1600 - Manual (Page 62)

Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
3-12 Changing the Current Standard Settings
Setting the Prescan Function
This function allows you to save the first copy time, by making the machine get ready to start
copying before you press
(Start).
NOTE
•
If <PRESCAN> is set to <ON>, the machine gets ready to start copying from the moment you set the original in the
feeder or on the platen glass.
• The factory setting is <ON>.
1
Enter the Additional Functions menu and open the <2.COPY SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Setting the Standard Exposure,” on p. 3-3.
2
Press or to select <9.PRESCAN>, and press .
When you press , the <PRESCAN> setting menu appears.
3
Press or to select <ON> or <OFF>, and press .
If you want to use the prescan function, select <ON>.
If you do not want to use the prescan function, select <OFF>.
When you press , the specified mode is set and the display returns to the <COPY SETTINGS> menu.
4
Press to return to the standby mode.
COPY SETTINGS
8.PRESCAN
PRESCAN
ON