Canon IR1600 - Manual (Page 42)

U
s
ef
u
l C
o
p
y
Fu
nc
ti
on
s
2
2-10 Erasing Shadows and Frame Lines from Copies (Frame Erase)
5
Press or to select the size of the original, and press .
When you press , the standby display appears.
NOTE
• You can set the Original Frame Erase mode only on the original sizes shown on the display.
• The machine selects the paper according to the original size you set in step 5 and the selected paper size is displayed.
6
Enter the desired copy quantity (1 to 99) using the numeric buttons.
For details about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-7.
7
Press (Start).
Copying starts.
NOTE
• To cancel all settings and return the machine to the Standard mode, press (Reset).
• If you press (Stop), the cancel job display appears. Select <YES> or <NO> using or .
• If you press (Stop) after copying has started, some sheets of blank paper may be output.
ORIGINAL SIZE
A3
100% ✱ A3
TEXT
05
CANCEL COPYING?
< YES NO >