Canon IR1600 - Manual (Page 53)

3-3 Changing the Current Standard Settings
Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
Changing the Current Standard Settings
Standard Settings refers to a combination of Copy modes that the machine automatically applies at
power on or when
(Reset) is pressed. In this section, the procedure for changing the Copy
modes stored as the Standard Settings is explained.
NOTE
•
The Standard Setting is applied when:
-
(Stop) or (Reset) is pressed (except for during copying)
- the Auto Clear function works
- the operation in the Additional Functions menu is finished
• The Standard Settings consists of the following seven settings:
- Standard Exposure
- Standard Zoom Ratio
- Standard Copy Quantity
- Frame Erase Width
- Auto Collate
- Sort Rotate
- Sharpness
Setting the Standard Exposure
You can set the standard copy exposure.
NOTE
• The default setting is <MANUAL> and 5 (center).
1
Press (Additional Functions).
2
Press or to select <2.COPY SETTINGS>, and press .
When you press , the <COPY SETTINGS> menu appears.
REGISTRATION/SETTING
1.COMMON SETTINGS
REGISTRATION/SETTING
2.COPY SETTINGS