Canon IR1600 - Manual (Page 56)

Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
3-6 Changing the Current Standard Settings
Setting the Standard Copy Quantity
You can set the standard copy quantity.
NOTE
•
The default setting is <01>.
1
Enter the Additional Functions menu and open the <2.COPY SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Setting the Standard Exposure,” on p. 3-3.
2
Press or to select <3.STANDARD COPY QTY>, and press .
When you press , the <STANDARD COPY QTY> menu appears.
3
Press or to set the desired standard copy quantity, and press .
You can also enter the standard quantity using the numeric buttons.
When you press , the standard copy quantity is stored and the display returns to the <COPY
SETTINGS> menu.
NOTE
• You can set the copy quantity in the range from 01 to 99.
4
Press (Stop) to return to the standby mode.
COPY SETTINGS
3.STANDARD COPY QTY
STANDARD COPY QTY
01