FRIGIDAIRE FFSE5115PA - Manual (Page 24)

24
ACCESSORIES
26.5” 26.
5”
(67 cm) (67
cm
)
15.0” 15.0”
(38 cm) (38 cm)
27.0” 27.0”
(68.5 cm) (68.5 cm
)
MATCHING STORAGE PEDESTAL*
Classic White Pedestal - P/N CFPWD15W
Classic Silver Pedestal - P/N CFPWD15A
A storage pedestal accessory, specifi cally designed for this dryer
may be used to elevate the dryer for ease of use. This pedestal will
add about 15” (38 cm) to the height of your unit for a total height
of 51.25” (130 cm).
*Other colors may be available. Contact the source where you purchased
your dryer.
DRYER STACKING KIT
P/N STACKIT4X
Depending on the model you purchased, a kit for stacking this dryer
on top of matching washer may have been included in the initial
purchase of your dryer. If your model did not include a stacking kit or
you desire another stacking kit, you may order one.
LP CONVERSION KIT
P/N PCK4200
Gas dryers intended for use in a location supplied with LP must use a
conversion kit prior to installation.
MOBILE HOME INSTALLATION KIT
P/N 137067200
Installation in a mobile home requires the use of a MOBILE HOME
INSTALLATION KIT.
DRYING RACK
P/N 137067300
Depending on the model you purchased, a drying rack may have
been included in the initial purchase of your dryer. If your model did
not include a drying rack or you desire another drying rack, you may
order one.
UNIVERSAL APPLIANCE WRENCH
P/N 137019200
A UNIVERSAL APPLIANCE WRENCH is available to aid in dryer/
washer/pedestal feet adjustment.
TOUCH UP PAINT PENS*
Classic White Touch Up Pen - P/N 5304468812
Classic Silver Touch Up Pen - P/N 5304471228
*Other colors may be available. Contact the source where you purchased
your dryer.
Replacement parts:
If replacements parts are needed for your dryer, contact
the source where you purchased your washer or refer to
your Use and Care Guide for more information.
CAUTION
Failure to use accessories manufactured by
(or approved by) the manufacturer could
result in personal injury, property damage or
damage to the dryer.
WARNING
ELECTRICAL SHOCK HAZARD
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after
servicing.