Acronis Recovery for Microsoft Exchange - User Guide - Manual (Page 73)

You can check if the settings are correct by clicking the Send Test E-mail Message
button.
11.2 SNMP
You can choose whether to send event log messages issued by Acronis Recovery for
MS Exchange to computers running SNMP (Simple Network Management Protocol)
management applications.
To specify SNMP settings, check the Send Notification with SNMP parameter to enable
SNMP notification.
In the Community Name field, enter the name of the SNMP community to which
both the Host (the computer running the SNMP management application) and the
computer running the task belong.
In the Host Name field, enter the name of the computer running the SNMP
management application, to which notifications will be sent. If not specified, messages
will be sent to all SNMP clients found in the local network.
Below in this window you can choose whether you want to get notifications:
• upon the operation's successful completion parameter
• upon the operation failure parameter
You can check if the settings are correct by clicking the Send test SNMP message
button.
11.3 Windows event log
You can save event messages to the Windows Event Log (to see this log, run
eventvwr.exe or select Control Panel -> Administrative tools -> Event Viewer).
To save event messages to Windows Event Log select the Save messages option and
choose one of the following from the drop-down list:
• All events - all events (information, warnings and error messages) will be
recorded to the Windows Event Log
• Warnings and errors - warnings and error messages will be recorded to
the Windows Event Log
• Errors only - only error messages will be recorded to the Windows Event
Log
73