Configuring your hardware – Dell PowerVault NX1950 User Manual
Page 8
6
Introduction
Figure 1-1.
PowerVault NX1950 Storage Solutions
Configuring Your Hardware
The PowerVault NX1950 storage solution is configured from Dell to
include the following peripherals:
•
PowerEdge™ Expandable RAID Controller (PERC) 5/i for internal
hardware redundant array of independent disks (RAID) 1
•
Serial-attached SCSI (SAS) 5/E host bus adapter (HBA) controller
to connect to the PowerVault storage sub-system for the integrated
solution
•
QLE2462 Fibre Channel HBA to connect to existing or new SANs
for the SAN gateway solution
PowerVault NX1950 System
PowerVault NX1950 System
PowerVault MD3000 Storage Array
Dell|EMC Storage Array
Windows Unified Data
Storage Server 2003
Windows Unified Data
Storage Server 2003
Integrated Solution
Dell|EMC SAN
Gateway Solution