Canon COLORPASS-Z6000 PS-NX6000 - Manual (Page 117)

5-11
5
Preliminary on-site checkout
Normal startup sequence
When you power on or reboot the ColorPASS, the system runs the following startup
routine on the Control Panel. The routine takes approximately 2-5 minutes to reach the
Idle screen. If the system hangs or data is missing during the startup sequence, note the
screen displayed and then check Figure 5-3 on page 5-11 for the possible problems and
suggested actions.
F IGURE 5-3 Normal startup sequence
xx.xx.xx
Server Name
Please wait
54744MB X.0
Info
Server Name
Idle
54744MB X.0
Info
Booting ...
xx.xx.xx
Code in motherboard BIOS tests, initializes,
and configures areas on the motherboard. System software on the HDD
completes startup process
Backlighting
Power on
Version of UIB
firmware is
displayed