Shown in figure 1, Bottom hole (see figure 1-6) – Dell PowerEdge 2900 User Manual
Page 16
Advertising
14
Rack Installation Guide
4 Install the 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flange’s top and bottom
holes to secure the mounting rail to the back vertical rail.
5 Repeat steps 1 through 4 for the mounting rail on the other side of the rack.
NOTE:
Ensure that the mounting rails are mounted at the same vertical position on both sides of the rack.
Figure 1-6.
Installing the VersaRails
1
flange-head Phillips screws
2
mounting-bracket flange
3
mounting rails
2
front of rack
3
1
Advertising