Dell LCD TV W3207C - Manual (Page 26)

26 Using the TV Menu
www
.de
ll
.co
m |
sup
por
t.d
e
ll
.c
om
FILE LOCATION: C:\Documents and Settings\cherylyuan\Ƈ¦±\FM\ch4e.fm
DELL CONFIDENTIAL – PRELIMINARY 6/30/06 – FOR PROOF ONLY
Selecting Your TV Menu Language
1 Press the MENU button to enter the TV Menu.
2 Select SETUP.
3 In the SETUP menu, select LANGUAGE and scroll to select the language that you want the
TV Menu to appear in.
Input Select
The Input Select menu allows you to select the proper source based on how you have your TV and
video equipment connected. Press INPUT on the remote to go directly to the INPUT SELECT
menu. You can also press MENU on the remote and select INPUT SELECT from the main menu.
If you are using the TV (NTSC connector) or the Digital TV (HDTV connector) input source, you
can preset the viewable channels. Go to the Main Menu, select SETUP-> CHANNEL SETUP
-> CHANNEL SEARCH. If you are using the
NTSC connector and the ATSC connector at
the same time, you need to preset the viewable
channels for both the Digital TV and the TV
input sources.
VGA — Select when you have your computer
connected to the VGA connector. See "Rear
View" on page 8 for the location of the VGA
connector.
HDMI( (High-Definition Multimedia
Interface) — Select when you have connected a device, such as a DVD player using the HDMI
connector. See "Rear View" on page 8 for the location of the HDMI connector.
TV ANALOG — Select when you have your antenna or cable TV box connected to the NTSC
connector. See "Rear View" on page 8 for the location of the NTSC connector.
TV
DIGITAL — Select when you have your antenna or cable TV box connected to the HDTV
connector. See "Rear View" on page 8 for the location of the NTSC connector.
W3207C_UM_EN.book Page 26 Friday, June 30, 2006 10:42 AM