Setup – Dell LCD TV W3207C User Manual
Page 30
30
Using the TV Menu
www
.de
ll
.co
m |
sup
por
t.d
e
ll
.c
om
FILE LOCATION: C:\Documents and Settings\cherylyuan\Ƈ¦±\FM\ch4e.fm
DELL CONFIDENTIAL – PRELIMINARY 6/30/06 – FOR PROOF ONLY
• Block Options — Turns on or off all your parental control settings
NOTE:
You can use Clear All to unblock the channels and programs that you have set.
Setting an Access Code
After you enter the Parental Control menu for the first time, you can set your own four-digit access
code.
1
In the Parental Control menu, select Change Code.
2
Using the number pad on the remote control, enter a new access code.
3
Select Exit.
NOTE:
Parental Control ACCESS CODE can be reset by pressing Channel down and Volume down keys
on front control panel simultaneously for 10 seconds.
Setup
Setup allows you to adjust the appearance of the TV
Menu, preset viewable cable channels, change the
language of the TV Menu (see "Selecting Your TV Menu
Language" on page 26) and to restore factory settings.
In the TV Menu Settings menu, use TV Menu Hold
Time to increase or decrease the amount of time the TV
Menu appears. The maximum amount of time is 60
seconds. You can select
TV Button Lock to lock the
buttons on the bottom panel. When this option is
enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
Channel Setup allows you adjust the settings for individual channels and preset the viewable
channels. If you are using the TV (NTSC connector) or the Digital TV (HDTV connector) input
source, you can preset the viewable channels. Go to the
Main Menu, select Setup, select Channel
Setup, and then select Channel Search. If you are using the NTSC connector and the HDTV
connectors at the same time, you need to preset the viewable channels for both the Digital TV and
the TV input source.
Language enables you to choose the TV Menu language.
Select Factory Reset to reset the TV Menu settings to the factory default values.
Select Remote Settings to enable support for legacy remote codes (RC5 codes). The default
selection is
No.
Sleep Timer allows you to set an increment of time after which the TV automatically turns off.
Select Closed Caption to turn on and off closed captioning and set several other CC options.
W3207C_UM_EN.book Page 30 Friday, June 30, 2006 10:42 AM