Dell PowerEdge 1750 - Manual (Page 23)

Ra c k I n s t a l l a t i o n G u i d e 1-17
Rack Kit Contents
The two-post rack kit includes (see Figure 1-12):
• One pair of slide assemblies (two-post)
• One stiffening bracket
• One cable-management arm
• Two stop blocks
• One status-indicator cable assembly
• Ten 12-24 x 0.5-inch pan-head Phillips screws
• Releasable tie wraps (not shown in Figure 1-12)
F i g u r e 1 - 1 2 . Tw o - P o s t R a c k K i t C o m p o n e n t s
Two-Post Rack Installation Tasks
Installing a two-post rack kit includes the following tasks in their numbered order:
1 Marking the rack
2 Installing the slide assemblies in the rack
• Center-mount installation
• Flush-mount installation
3 Installing the system in the rack
12-24 x 0.5-inch pan-head
Phillips screws (10)
stop blocks (2)
status-indicator cable
slide assemblies (2) cable-management arm
stiffening bracket
5X860eb0.fm Page 17 Monday, October 21, 2002 11:49 AM