Installing the cable-management arm, Routing cables – Dell PowerEdge 1750 User Manual
Page 32
Advertising
1-26
Ra c k I n s t a l l a t i o n G u i d e
www
.dell.com | support.dell.com
8
Press the slide release latch at the side of each slide and push the system completely
into the rack (see Figure 1-18).
9
Push in and turn the captive thumbscrews on each side of the front chassis panel to
secure the system to the rack.
Installing the Cable-Management Arm
See "Installing the Cable-Management Arm" in "Four-Post Rack Installation."
Routing Cables
See the procedure "Routing Cables" in "Four-Post Rack Installation."
You have completed the installation of the rack kit in a two-post rack.
5X860eb0.fm Page 26 Monday, October 21, 2002 11:49 AM
Advertising