Non-optimal memory configurations, Poweredge 2950 iii - new system features, New performance features – Dell POWEREDGE 2950 User Manual
Page 5: Poweredge 2950 iii – new system features
Information Update
5
Non-Optimal Memory Configurations
The POST may halt when a non-optimal memory configuration is detected
and the following message is displayed:
Non-Optimal Memory Configuration
Press F1 to continue or F2 for Setup
NOTE:
Mixing DIMMs of different speeds renders the memory configuration
non-optimal. The system clocks down the performance to the slowest speed
in the DIMM set for the channel.
PowerEdge 2950 III – New System Features
New Performance Features
•
Two dual-core or quad-core Intel
®
Xeon
®
5400 Series and 5300 Series
processors.
•
8-GB memory module support.
New High-Efficiency Power Supply and Power Monitoring Features
•
Higher system efficiency on power conversion across workloads.
•
Baseboard Management Control (BMC) power monitoring monitors
current, voltage, and power utilization in the system.