Front panel, Removing the front panel, Replacing the front panel – Dell Precision 650 User Manual
Page 33
Back to Contents Page
Front Panel
Dell Precision™ Workstation 650 and Dell Precision Workstation 450 Service Manual
Removing the Front Panel
1.
Disconnect and remove all disk drives (for more information, see "
Drives — Dell Precision™ 650 Computer
" or "
Drives — Dell Precision™ 450 Computer
."
2.
Release the front panel by pressing each of the front-panel release tabs.
The Dell Precision 650 computer has seven release tabs and the Dell Precision 450 computer has seven release tabs.
Dell Precision 650 Computer
Dell Precision 450 Computer
3.
Close the computer cover halfway and pull the front panel away from the computer.
Replacing the Front Panel
To replace the front panel, perform the
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.