Chicago Electric 90 AMP FLUX WIRE WELDER 68887 User Manual
Page 2
Page 2
For technical questions, please call 1-800-444-3353.
Item 68887
Table of Contents
Safety ......................................................... 2
Specifications ............................................. 6
Setup .......................................................... 7
Basic Welding ............................................ 12
Welding Tips .............................................. 18
Maintenance .............................................. 22
Parts List and Diagrams ............................ 25
Warranty .................................................... 28
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
General Safety Information
PROTECT yourself and others. Read and understand this information.
1.
Before use, read and understand
manufacturer′s instructions,
Material Safety Data Sheets (MSDS),
employer′s safety practices, and ANSI Z49.1.
2.
Keep out of reach of children.
Keep children and bystanders away while operating.
3.
Place the Welder on a stable location before use.
If it falls while plugged in, severe injury,
electric shock, or fire may result.
4.
Stay alert, watch what you are doing and use
common sense when operating a welder.
Do not use a welder while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating welders
may result in serious personal injury.
5.
Do not overreach.
Keep proper footing and balance at all times.
6.
Avoid unintentional starting. Make sure you are
prepared to begin work before turning on the Welder.
7.
Never leave the Welder unattended while
energized. Turn power off if you have to leave.
8.
The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAFETY
MAINTENANCE
BASIC WELDING
WELDING TIPS
SETUP