Canon BP-511 - Manual (Page 113)

113
Pla
ying and Er
asing Recorded Images
5
When the date/time back-up battery level is low, “ ” will appear on the LCD panel. Replace
the CR2025 lithium battery as follows.
If you replace the backup battery while the camera is connected to a battery pack with power
remaining or to a DC coupler, the date, time, and other menu functions will retain their settings.
1 Set the Main Switch to < OFF >.
2 Open the date/time battery cham-
ber cover by turning it 45 degrees
counterclockwise, as shown by
the arrow in the diagram.
● Be careful not to rotate the cover more than
45 degrees.
3 Take out the old battery.
● With the camera bottom facing downward,
push in the edge of the battery to take it
out.
4 Install a new battery.
● The plus side of the battery must face
upward.
5 Close the cover by turning it
clockwise, as shown by the arrow.
● If the date and time now displayed in the
LCD panel are incorrect, you will need to
set them. (
→ 34)
Replacing the Date/Time Battery
For the date/time battery, be sure to use a CR2025 lithium battery.
( + )
( –)