Canon BP-511 - Manual (Page 137)

137
Reference
7
REFERENCE
CF card is not loaded correctly.
➡ Load the CF card correctly. ( → 28)
CF card is full.
➡ Change to a new CF card, or erase unwanted images. ( → 28, 43,
104)
The battery pack is out of power.
➡ Charge the battery pack. ( → 22)
Image out of focus (In-focus light in the viewfinder blinks).
➡ Press the shutter button down halfway to focus again. If this fails,
focus manually. ( → 29, 59)
Dust or foreign matter on the monitor.
➡ Clean the monitor with a soft eyeglass cloth.
LCD monitor is worn out.
➡ Consult the store where you bought your camera, or a Canon
Service Center. ( → 10, back cover)
Lens focusing mode switch set to <MF > (or < M >).
➡ Set the focusing mode switch to < AF >. ( → 27)
Camera shake when the shutter button is pressed.
➡ Press the shutter button carefully so that the camera does not shake.
( → 29, 36)
CF card data is corrupted.
➡ Format the CF card. ( → 105)
➡ Use the specified type of CF card. ( → 2, 139)
The date/time battery is exhausted.
➡ Replace the battery with a new one. ( → 113)
Unable to shoot or
record images
LCD monitor
displays and
images are hard to
see
Images are blurred
Unable to use the
CF card
The message
“
” appears on
the LCD panel
Shooting
Images may be protected.
➡ Remove image protection. ( → 103)
Date/Time setting may be incorrect.
➡ Set date/time correctly. ( → 34)
Video cable plugs are not inserted fully.
➡ Insert the video cable plugs firmly all the way. ( → 112)
The correct video format (NTSC or PAL) has not been set.
➡ Set the camera to the correct video format to match the TV set.
( → 112)
Cannot erase
images
Incorrect date and
time displayed
No image appears
on the TV screen
Checking and Handling Images