Canon SX200 LS - Manual (Page 57)

57
The explanations for viewing or erasing unwanted images are basically the
same as in "
1 Viewing Images" (p. 27) and " / Erasing Images" (p. 28)
except that operational instructions are displayed on the screen, and the
camera is set so that only the buttons explained on this page are functional.
This prevents incorrect operation of the camera, allowing even beginners to
view or erase images worry-free.
Viewing Single Images
Press the
1 button.
X The last image you took will appear.
Select an image.
● Press the qr buttons to switch between
images.
Viewing Slideshows
Press the
1 button.
Press the
m button.
X All the shots you have taken will display
for about 3 seconds each.
● Press the m button again to stop the
slideshow.
Erasing Images
Select an image to erase.
X Press the qr buttons to select the image
you want to erase.
Erase the image.
● After pressing the
p button, press the qr
buttons or turn the  dial to select
[Erase]. Then press the m button.
X The selected image will be erased.
9 Viewing or Erasing in Easy mode