Exposure compensation, When shooting with a flash (safety fe), P. 99) – Canon SX200 LS User Manual
Page 99: Select [flash settings, Make the setting
Advertising
99
The camera automatically changes the shutter speed or aperture value
when the flash fires to avoid overexposing and blowing out the highlights in
the scene.
Select [Flash Settings].
●
Press the
n button, select [Flash
Settings] from the
4 tab and press the
m button.
Make the setting.
●
Press the
op buttons or turn the  dial
to select [Safety FE], then press the
qr
buttons to select [On] or [Off].
Exposure Compensation When
Shooting With A Flash (Safety FE)
In
M and B shooting modes, set [Flash Mode] to [Auto] in advance
Advertising