101 select y, Press the l button, Specify the color to be swapped – Canon SX200 LS User Manual
Page 101: Specify the target color, Specify the range of colors to be swapped
Changing the Color and Shooting
101
Select
Y.
●
Follow Step 1 on
to select
Y.
Press the
l button.
●
The unchanged image and the Color
Swap image will both display.
●
The default setting is to change green to
gray.
Specify the color to be swapped.
●
Position the center frame so it is filled with
the color you want and press the
q button.
X
The specified color will be recorded.
Specify the target color.
●
Position the center frame so it is filled with
the color you want and press the
r button.
X
The specified color will be recorded.
Specify the range of colors to be
swapped.
●
Press the
op buttons or turn the  dial
to adjust the range of colors affected.
●
Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
●
Pressing the
l button accepts the
setting and restores the shooting screen.