Troubleshooting, Power, Tv output – Canon SX200 LS User Manual
Page 151: Shooting
151
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
•
Confirm that the battery is properly inserted
.
•
Confirm that the memory card/battery cover is securely closed
.
•
If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
•
Battery performance decreases at low temperatures. Warm the battery by such
methods as placing them in your pocket with the terminal cover on.
Lens will not retract.
•
Do not open the memory card/battery cover while the power is on. After closing
the memory card/battery cover, turn the power on then back off
.
TV output
Image is distorted or not showing on TV
Shooting
Cannot shoot.
•
Set the mode dial to the desired shooting mode
•
When in playback mode
, press the shutter button halfway
Camera screen is black at start-up.
•
Images that have been edited on a computer, have had their file name changed,
or that have been shot on another camera may not display properly if set as a
start-up screen.
Screen does not display properly in dark places
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
•
When the camera is subjected to powerful light sources, the display may
darken.
•
Under fluorescent lighting, the screen may flicker.
•
When shooting bright light sources, a bar of light (purplish red) may appear on
the screen.
•
The
h icon blinks when you try to shoot
h appears on the screen and the shot cannot be taken even
though the shutter button was pressed fully
Troubleshooting