Setting the display language, Set the playback mode, Display the settings screen – Canon SX200 LS User Manual
Page 21: Set the display language
21
You can change the language displayed in the LCD monitor menus and
messages.
Set the playback mode.
●
Press the
1 button.
Display the settings screen.
●
Press and hold the
m button , then
immediately press the
n button .
Set the display language.
●
Press the
opqr buttons or turn the Â
dial to select a language, then press the
m button.
X
Once the display language has been set,
the language menu will close.
The clock will display if too much time passes between pressing the
m button
and the
n button in Step 2. If the clock appears, press the m button to
remove the clock and repeat Step 2.
Setting the Display Language
What if the clock appears when the
m button is pressed?
You can also change the display language by pressing the
n button,
selecting the
3 tab, and selecting the [Language] menu item.