Canon DIM-787 - Manual (Page 19)

Getting Started
Prep
arati
o
ns
19
Preparations
Getting Started
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
1
Turn off the camcorder.
2
Attach the battery pack to the
camcorder.
• Press the battery pack lightly and
slide it down until it clicks.
3
Plug the compact power adapter
into a power outlet.
4
Connect the compact power adapter
to the camcorder’s DC IN terminal.
• The CHARGE indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
O
NCE THE BATTERY IS FULLY CHARGED
1
Disconnect the compact power
adapter from the camcorder.
2
Unplug the compact power adapter
from the power outlet.
T
O REMOVE THE BATTERY PACK
Press to release the battery
pack. Lift the battery pack and then
pull it out.
Getting Started
Remove the battery
terminal cover before
attaching the battery
BATT. switch
CHARGE
indicator
DC IN
terminal
BATT.