Canon DIM-787 - Manual (Page 42)

Menu Options Lists 42
* The following options are available only
when you press
in the index
screen.
Press ( ) to protect the image.
Press ( ) to set the print order.
Press ( ) to set the transfer order.
Display Setup (LCD Brightness, Language, etc.)
DISPLAY SETUP
Adjust ( ) the brightness of the LCD
display with the joystick.
Changing the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
[ NORMAL]*, [ BRIGHT]
* The default setting is [ BRIGHT]
when you power the camcorder using the
compact power adapter.
[ ON], [ OFF]
[ ON], [ OFF]
When set to [ ON], the camcorder’s
on-screen displays will appear also on the
screen of a connected TV or monitor.
When the date and time are displayed on
the camcorder’s screen they will also
appear on a connected TV regardless of
the [TV SCREEN] setting. Turn off the
date/time display with the [DATA CODE]
setting (
43).
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [ GRID(WHT)],
[ GRID(GRY)]
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Using the markers will not affect the
recordings on the tape or memory card.
[ ON], [ OFF<PLAYBK>]
You can hide the on-screen displays to
show only the playback picture on the full
screen.
Tape operation displays appear for 2
seconds.
PROTECT*
( 61)
PRINT ORDER*
( 75)
TRANSFER ORDER*
( 71)
BRIGHTNESS
BACKLIGHT
( 24)
FUNC.
TV SCREEN
MARKERS
DISPLAYS