Dell POWEREDGE M1000E - Manual (Page 14)

Software User’s Manual Rev 1.00
14
Description:
Display the current software image version.
Example:
3.4.2 copy image from-file
Synopsys:
copy image from-file
Description:
Update the firmware the PTM software image. In ADMIN mode, it allows selective upgrade of a
single device in the PTM. Immediately after running this command, the CLI waits for the user to
send the firmware image using the ZModem protocol. To abort this operation, use CTRL-C. For
additional details on the firmware update procedure refer to
Section 4, “Operating Procedures,”
on page 17 .
Example:
# copy image from-file
#