5 port commands, 1 show port link, Port commands 3.5.1 show port link – Dell POWEREDGE M1000E User Manual

Page 15

Advertising
background image

Rev 1.00

15

3.5

Port Commands

3.5.1 show port link

Synopsys:

show port link [port_number]

Description:

This command displays detailed port information. If an uplink port number is specified
([port_number]), then the command displays information only for this port; otherwise, the com-
mand displays information for all the ports.

The command displays the following information per port:
• Port number
• Port group identifier and speed: A, B, followed by the configured speed (10G)
• Pass through connection status, may have one of the following values:

down - either uplink or downlink is not connected

mismatch - both uplink and downlink are connected, but there is a mismatch

10G - uplink and downlink are connected at 10GbE

• Downlink port link state:

- down: blade not present
- 10G: 10GbE link

• Uplink port link state:

- empty: No module present
- module_type [no link]: Module is present (module type is shown);

no link: optical fiber cable is disconnected

Example:

# show port link
Port

Group

Connect

Downlink

Uplink

Status

--------------------------------------------------------------
1

A (10G)

10G

10G

SFP+ SR

Link Up

2

A (10G)

10G

10G

SFP+ SR

Link Up

3

A (10G)

10G

10G

SFP+ LR

Link Up

4

A (10G)

10G

10G

SFP+ SR

Link Up

5

A (10G)

10G

10G

SFP+ SR

Link Up

6

A (10G)

mismatch

10G

SFP SX

Link Down

7

A (10G)

down

down

SFP+ SR

Link Down

8

A (10G)

down

down

empty

9

B (10G)

mismatch

10G

SFP SX

Link Down

10

B (10G)

mismatch

10G

SFP SX

Link Down

11

B (10G)

mismatch

10G

SFP SX

Link Down

12

B (10G)

mismatch

10G

SFP LX

Link Down

13

B (10G)

down

down

empty

14

B (10G)

down

10G

SFP+ SR

Link Down

15

B (10G)

mismatch

1G

SFP+ SR

Link Down

16

B (10G)

mismatch

1G

SFP+ SR

Link Down

Advertising