Palm rest, Removing the palm rest – Dell Latitude D410 User Manual
Page 23
Back to Contents Page
Palm Rest
Dell™ Latitude™ D410 Service Manual
Removing the Palm Rest
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
center control cover
.
3.
Remove the
keyboard
.
4.
Remove the
internal card with Bluetooth® wireless technology
.
5.
Remove the
display assembly
.
6.
Turn the computer over and remove the 12 M2.5 x 5-mm screws from the computer base.
7.
Turn the computer top side up and remove the five M2.5 x 5-mm screws and the M2 x 3-mm screw from the palm rest.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5 x 5-mm screws (12)